Problem With Printhead X (X Is L, R, Or Lr) - Canon imagePROGRAF iPF6200 User Manual

Messages regarding printheads

Problem with Printhead x (x is L, R, or LR)

The Printhead nozzles are becoming clogged.
x printhead error (x is Left or Right)
An incompatible Printhead has been installed.
There is a problem with the Printhead.
702 Error Message
Cause
Cause
Corrective Action
If printing is faint, clean the Printhead. (→P.625)
Corrective Action
Install a Printhead specied for use with the printer. If
"Printhead L" is displayed, install the Printhead L ; if
"Printhead R" is displayed, install the Printhead R.
(→P.626)
Open the Top Cover. If the Carriage is over the
Platen, replace the Printhead with a new one. If
"Printhead L" is displayed, replace the Printhead L ; if
"Printhead R" is displayed, replace the Printhead R.
(→P.626)
If, after opening the Top Cover, you see that the
Carriage is not over the Platen, follow the steps
below.
1.
Turn off the printer and wait at least three seconds
before restoring the power.
2.
Lift the Top Cover and make sure the Carriage
is over the Platen. If "Printhead L" is displayed,
install the Printhead L, and if "Printhead R" is
displayed, install the Printhead R.
(→P.626)