Canon imagePROGRAF iPF6200 User Manual page 111

9.
Send the print job.
•
Printing from Windows (→P.100)
•
Printing from Mac OS X (→P.101)
Start printing.
Note
•
Steps 6 and 7 are not required if a barcode has been printed on the roll and you have activated automatic
detection of the remaining roll paper. The type of paper and amount left are automatically detected.
•
Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading
edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic
so that the paper edge is automatically cut before printing.
•
For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide.
(→P.113) (→P.108)
•
Clean the platen after you have used up a roll. (→P.641)
•
When a roll has been advanced, do not pull it out by force. This will prevent the paper from being
advanced. (→P.124)
If you accidentally pull out the paper, see "Roll Paper Cannot be Inserted into the Paper Feed Slot".
(→P.664)
•
When printing on rolls after printing on sheets, if the lit paper selection lamp does not switch from the
Cut Sheet lamp to the Roll Media lamp, press the Feeder Selection button.
Printing procedure
Basic Printing Workow 97