Canon imagePROGRAF iPF6200 User Manual page 137

3.
Close the Roll Feed Unit Cover.
Note
•
How the printer operates after the paper is fed varies depending on the setting for automatic
detection of the remaining roll paper, as well as the barcode printed on rolls.
Automatic Detection of the
Remaining Roll Paper
On
Off
•
If the edge of the roll is bent or soiled, cut the edge of the paper. (→P.135)
Printer Operation After the Paper is Fed
Barcodes
Printed The type and amount of paper left is
automatically detected based on the barcode
printed on the roll.
There is no need to specify the type and
length of the paper.
Not printed You must specify the type and length of the
paper. A menu for selection of the paper type
and length is automatically shown on the
Display Screen.
(→P.117)
(→P.118)
Printed You must specify the type of paper.
(→P.117)
Not printed
Handling rolls
Handling Paper 123