Suggested Entrapment Protection Device Locations - Chamberlain CSW200UL Owner's Manual

s u g g E s T E d E N T R A P M E N T P R O T E c T I O N d E V I c E l O c A T I O N s
To prevent SERiOuS iNjuRy or DEATh from a moving gate:
• Entrapment protection devices MuST be installed to protect anyone who may come near a moving gate.
• Locate entrapment protection devices to protect in BOTh the open and close gate cycles.
• Locate entrapment protection devices to protect between moving gate and RiGiD objects, such as posts or walls.
• A swinging gate shall NOT open into public access ways.
Non-contact sensors (Photoelectric sensors)
install photoelectric sensors to protect
against any entrapment or safety conditions
encountered in your gate application.
6
Safety loops allows the gate to
stay open when vehicles are
obstructing the gate path.
Suggested for vehicles 14 feet or
longer. if a vehicle is shorter, a
center loop is recommended and
should be installed.
A center loop protects during a
Close cycle of the gate. Safety
loops are required when using a
center loop.
See Loop Wiring.