110Vac Power Connection; Heater Power Connection - Chamberlain CSW200UL Owner's Manual

Power supply in
waterproof conduit.
110Vac Power Wire
1/2 HP and Dual Motor
1 HP
Connect the black, white and ground wire from the heater to the 110Vac power supply as shown. When the heater switch is left in the
"ON" position, the heater will turn on and off automatically when needed.
Switch should left in the
"ON" position.
1 1 0 V a c P O w E R c O N N E c T I O N
White Neutral
16 Gauge 14 Gauge
up to 150 FT 250 FT
up to 75 FT 125 FT
h E A T E R P O w E R c O N N E c T I O N
On-Off switch for operator
Green Ground
Black 110Vac
Earth ground Rod highly Recommended!
12 Gauge 10 Gauge
400 FT
200 FT
Power
Supply
18
use a 20 amp dedicated circuit for each operator.
input power 120Vac, 60 hz.
8 Gauge
650 FT 1000 FT
325 FT 500 FT
To reduce the risk of SERiOuS iNjuRy:
DO NOT touch the heater when switch is
on, heater may be hot.
Green Wires Ground
Black Wires 110Vac
White Wires Neutral
See previous page.
4 Gauge
2200 FT
1100 FT