Chamberlain CSW200UL Manual

CSW200UL™ Series Mounting Plate
Type 1
3" Posts mounted on Outside
3" O.D. Heavy Walled Posts and U-Bolts
Top View of Type 1
1 /
22 "
4
Mounting Holes
1 /
16 "
2
Conduit Holes
Mounting Holes
Front
Type 2
3" Posts mounted on Inside
Plate MUST be Level!
Cement posts in place. Depth
of posts determined by soil
conditions and local codes.
Power and control
wiring should be run
in separate conduits.
Distance between
critical!
posts are
Not Provided
Top View of Type 2
15
Mounting Holes
1 /
"
16
22" 2
Conduit Holes
Mounting Holes
Front
19
Type 3
4" Square Posts welded on Inside
Plate MUST be Level!
Cement posts in place. Depth
of posts determined by soil
conditions and local codes.
Power and control
wiring should be run
in separate conduits.
3 /
"
4
22"
1 /
"
4
Note: Refer to the instruction
manual for different installation
setups. Dimensions will vary.
Standard Installation
4" O.D. Heavy Walled
Square Posts
Top View of Type 3 Top View of Type 3
Not Provided
Mounting Holes Mounting Holes
Weld Completely
around posts
Center posts
between
mounting holes.
keep the posts
close to the
Mounting Holes Mounting Holes
plate edge.
Front Front
1 /
19 "
4
Model # MPEL
35.5"
46"
Hinge
29.5"
Center
11"
Top View of Typical
For Technical Support
and Ordering Parts:
1-800-528-2806
®
™
© 2004 The Chamberlain Group, Inc.
2"
All Rights Reserved