Table of Contents
Advertisement
S U G G E S T E D E N T R A P M E N T P R O T E C T I O N D E V I C E LO C AT I O N S
FREE EXIT ON VEHICLE APPROACH
Gate will open when sensed by open loop and then close once all
loops are cleared if the close timer is on. Close input can be used
to close gate before timer expires (Figure 1).
Terminal #1, 2, and 3 are open inputs.
Terminal #5 is safety input.
ENTRY WITH ACCESS CONTROL DEVICE
Gate will open when activated by an access control device. When
timer expires (if used), gate will close (Figure 2).
Terminal #5 is safety input.
Terminals #1, 2, and 3 are open inputs.
DUAL DIRECTION AS ENTRY AND FREE EXIT
Dual direction is a combination of both of the above
configurations to provide the ability for traffic to enter or exit in
the same lane (Figure 3).
DO NOT ALLOW CONTROL DEVICES TO BE WITHIN 10' OF GATE
OR OPERATOR
RECOMMENDATION 1: If vehicle detectors are used to open or
close the gate, use of the presence contacts are recommended.
Using the pulse contacts will REDUCE the gate's safe operation.
RECOMMENDATION 2: Use safety pressure sensing edges to
prevent entrapment.
RECOMMENDATION 3: Install ALL access control devices
within view of gate.
FIGURE 1
Safety
Loop
FIGURE 2
Card Reader
Tele-entry
Radio Control
FIGURE 3
Card Reader
Tele-entry
Radio Control
15
Open
Loop
Mega Slide UL
Safety
Safety
Loop
Loop
Mega Slide UL
Safety
Open
Loop
Loop
Mega Slide UL
Advertisement
Table of Contents
