Entrapment Protection Devices (Non-Contact Sensors) - Chamberlain CSW200UL Owner's Manual

Non-contact sensors (12Vdc Photoelectric sensors)
NOTE: Property owners are
obligated to test photoelectric
sensors monthly.
NOTE: If the photoelectric sensor gets
blocked while the gate is closing, it will
stop and reopen. The gate will remain
open until the obstruction is cleared.
E N T R A P M E N T P R O T E c T I O N d E V I c E s
Entrapment Non-Contact Sensor
To prevent SERiOuS iNjuRy or DEATh from a moving gate:
• Locate entrapment protection devices to protect in BOTh the
open and close gate cycles.
• Locate entrapment protection devices to protect between
moving gate and RiGiD objects, such as posts or walls.
Safety Non-Contact Sensor
It is best to use Failsafe Photoelectric
Sensors for this safety option.
Failsafe Photoelectric Sensors: if a failsafe
photoelectric sensor is not working or loses
power or photoelectric sensor is blocked, then
the photoelectric sensors will stop ALL gate
operation.
Contact your local dealer for more
information about photoelectric sensors.
26