Administrator Setup; Setup: Administrator - Oki CX3641MFP Technical User Manual

Scan to E-mail: Administrator Setup

Administrator Setup

The Administrator parameters are set by the system Administrator.
They include general settings and defaults that define how the
CX3641 operates. For a complete list, see Table 8-11, "Administrator
Parameters".
The Administrator password must be entered to access these
NOTE:
parameters.
From the Setup Main Menu, touch the Administrator Setup
1.
button to display the options.
S : A
ETUP
FIGURE 8-17.
Select an option by touching the button (use the Up and Down
2.
Arrows to page through all the options) and set the scan
parameters as described in Table 8-11.
Touch an option to change its setting as described in Table 8-10.
3.
Touch OK to save the setting. You are prompted to confirm the
change.
Administrator Parameters
TABLE 8-11.
Parameter Explanation
Power Save Power save mode can be enabled (CX3641 goes into
Mode power save mode when not touched for a set amount of
time) or disabled (CX3641 never goes into power save
mode). When it is enabled, use the Machine Setup
function to set the time (see Table 8-7, "Machine Setup
Parameters," on page 134).
Scan to Enables or disables the Scan to E-mail function. When
E-mail enabled, users can access Scan to E-mail; when
disabled this function cannot be used.
Scan to FTP Enables or disables the FTP Server function. When
enabled, users can scan files and send them to an FTP
Server; when disabled this function cannot be used.
CX3641 Advanced Technical User Guide
DMINISTRATOR
139