Oki CX3641MFP Technical User Manual page 23

Introduction: SendMe-Related Functions
SendMe-Related Functions
TABLE 1-4.
To do this . . .
Specify a file name for a scanned document
Copy a document that is not a standard
size
Have your copies come out of the printer
with the printed-side up or printed-side
down
Print a color original in grayscale
Speed up your copy job by printing in a
lower resolution
Print in the best resolution
Tell the printer to increase or decrease the
size of the original to match the selected
output size
Tell the printer to print on only one side of
the paper
Tell the printer to print on both sides of the
paper
Print your first page first, or your first
page last
Print multiple copies of multiple pages so
they are collated into groups that have
every page
Print multiple copies of multiple pages so
they are collated into a group for each
individual page
Insert staples in your copy job (left or right
side, or down the center)
Set the properties for your scanned
attachment
CX3641 Advanced Technical User Guide
Go to this Section . . .
"File Name" in Table 5-1,
"SendMe Print Options," on
page 79
"Page Size" in Table 5-1,
"SendMe Print Options," on
page 79
"Output Tray" in Table 5-1,
"SendMe Print Options," on
page 79
"Color Mode" in Table 5-1,
"SendMe Print Options," on
page 79
"Resolution" in Table 5-1,
"SendMe Print Options," on
page 79
"Resolution" in Table 5-1,
"SendMe Print Options," on
page 79
"Scale to Fit" in Table 5-1,
"SendMe Print Options," on
page 79
"Duplex" in Table 5-1,
"SendMe Print Options," on
page 79
"Duplex" in Table 5-1,
"SendMe Print Options," on
page 79
"Page Order" in Table 5-1,
"SendMe Print Options," on
page 79
"Collate" in Table 5-1,
"SendMe Print Options," on
page 79
"Collate" in Table 5-1,
"SendMe Print Options," on
page 79
"Stapler" in Table 5-1,
"SendMe Print Options," on
page 79
"Using the SendMe Scan
Settings" on page 82
23