Rear Brake Control - MOTO GUZZI V 11 SPORT Workshop Manual

A
B
A
C
D
E
F
G
H
I
L
M
N
O
P
4
B
D
C
A
B
3

REAR BRAKE CONTROL

Disassembly:
• Unscrew screw "A" connecting the gearbox lever control
to the pump and remove it together with the check-
nut;
• Unscrew pin "B" fastening the lever to the chassis and
remove it together with the bushing and the washer;
• Remove the lever from the chassis;
• Unscrew screw "C" and remove the O ring and the cam
"D" from the chassis;
Tank removal:
• Drain the hydraulic system thoroughly as described in
chapter 2, section D;
• Release the saddle as described in chapter 4, section
E;
• Unscrew and remove nut "A" and the washer;
• Loosen the tube clamp "B";
• Slide out the tube from the coupling on the tank;
• Remove the tank.
Reassembly:
Carry out the procedures in reverse order.
C
ONTROLS