Table of Contents
Advertisement
12. Close the load plate.
13. Close the socket lever. Push downward on the socket lever while pushing it toward
the center of the processor socket to engage it under the hook on the processor
socket.
14. If installing a replacement processor, see
15. Reinstall and reconnect any parts you removed or disconnected to reach the
processor sockets.
16. Install the chassis cover. For instructions, see
page
Installing or Removing a Heatsink
Installing a Heatsink
Caution:
•
If you have removed the processor from the socket, thoroughly clean the thermal
grease from the underside of the heatsink before re-installing the heatsink over the
processor socket. If you are installing a replacement processor, clean the thermal
grease and reapply thermal grease.
•
The server system must be operated with both heatsinks installed, even if only a
single processor is installed.
•
Use only the heatsinks that were shipped with the server system. Do not use the
heatsink that shipped with the boxed processor in this server system.
Use the following steps to install a heatsink.
1. Use the syringe to apply thermal grease to the top of the processor.
2. Set the heatsink over the processor socket, lining up the four captive screws with
the four posts surrounding the processor socket.
76
25.
Figure 83. Applying Thermal Grease
"Installing a Processor" on page
"Installing the Chassis Cover" on
AF001487
Intel® Server System SC5400RA User's Guide
70.
Advertisement
Table of Contents
