Replacing a System Fan
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover. For instructions, see
page
5. Disconnect the fan power cable from the server board.
6. Lift the 92-mm fan (see letter "A" in the following figure) or the 120-mm fan (see
letter "B") from its snap-in bracket.
7. Set the replacement fan into place.
8. Connect the fan power cable to the server board.
9. Install the chassis cover. For instructions, see
page
10. Plug all peripheral devices and the AC power cable into the server.
11. Power up the server.
84
24.
A
92-mm
Fixed Fan
Figure 90. Removing a Fixed Fan
25.
"Safety Information" on page
"Removing the Chassis Cover" on
B
120-mm
Fixed Fan
TP001493
"Installing the Chassis Cover" on
Intel® Server System SC5400RA User's Guide
129.