15. Slide the memory riser cards into the memory cage. Be sure to insert each side edge
of the memory riser cards through the channel guides in the memory riser cage. See
the figure below.
16. Push firmly on the top edge of the memory riser cards to seat them into the sockets
on the server board.
17. Close the door on the memory cage and tighten the thumbscrew.
18. Install the chassis cover. For instructions, see
page
19. Reconnect the AC power cord.
Intel® Server System SC5400RA User's Guide
Figure 68. Inserting Memory Riser Cards
25.
"Installing the Chassis Cover" on
AF001413
65