Table of Contents
Advertisement
Issue 5.0
SV8100 M
S
8
ECTION
8.1
8.2
A
S
9
UDIBLE AND
ECTION
9.1
9.2
5 - 30
IGRATION
Description
The MGN-U10 ETU is supported only in the B64-U10, U20, and U30 KSU's.
The MGN-U10 ETU is available only with the SV8100 system.
The MGN-U10 ETU provides a connection between the IPK/IPK II and the
UNIVERGE SV8100 system. The MGN-U10 ETU is installed in the CPU/Ext
slot of the IPK/IPK II KSU.
IPK/IPKII Migration is supported only with the CHS2U-US (6-slot) chassis.
The CHS2U GW-US (3-slot) chassis is not supported.
A single SV8100 chassis is supported in an IPK/IPK II Migration system.
Conditions
The IPK/IPKII systems are limited to 18 total card slots.
An IPK system can support the migration card, provided the cards and
terminals are listed below as being supported. It may be necessary to
upgrade firmware as noted.
MEGACO is not supported.
V
I
ISUAL
Tone Patterns
Table 5-20 Tone Patterns
Tones are used to inform UNIVERGE SV8100 station users of system
functions such as dial tone, busy tone, or ringback tone.
Multiline Terminal LED Flash Patterns
The UNIVERGE SV8100 system has 2-color LEDs. Green is used primarily
for I-Use conditions and for outside calls. Red is used primarily for Other Use
conditions and internal calls. Refer to
Pattern.
NDICATION
lists the frequency and the pattern for the tones.
Table 5-21 Multiline Terminal LED Flash
UNIVERGE SV8100
Hardware Specifications
Advertisement
Table of Contents
