Table of Contents
Advertisement
UNIVERGE SV8100
The UNIVERGE SV8100 system allows a maximum of 240 Electra Elite IPK terminals
to be attached to the system.
Facsimile CO Branch Connection
The UNIVERGE SV8100 system provides branch connection of locally provided
facsimile machines to CO/PBX lines. Additional dedicated CO/PBX lines are not
required for a facsimile to operate. The facsimile shares any CO/PBX line on the COI
Package and Power Failure (PF) circuit.
Flash
Flash allows an extension user to access certain CO and PBX features by interrupting
the trunk loop current. Flash lets an extension user take full advantage of whatever
features the connected Telco or PBX offers. You must set the Flash parameters for
compatibility with the connected Telco or PBX.
Flexible System Numbering
Flexible System Numbering lets you reassign the system port-to-extension
assignments. This allows an employee to retain their extension number if they move
to a different office. In addition, factory technicians can make comprehensive changes
to your system number plan. You can have factory technicians:
Talk to your sales representative to find out if this program is available to you.
You can also use Flexible System Numbering to change the system Trunk Group
Routing code. Although the default code of 9 is suitable for most applications, you
can alter the code if needed.
Flexible Timeouts
The Flexible Timeouts feature provides a variety of timers in the Resident System
Program to allow the system to operate without initial programming. The system
timers can be changed to meet customer needs according to the system application
requirements.
General Description Manual
Set the number of digits in internal (Intercom) functions. For example, extension
numbers can have up to eight digits.
Change your system Service Code numbers.
Assign single digit access to selected Service Codes.
Issue 5.0
2 - 31
Advertisement
Table of Contents
