Table of Contents
Advertisement
UNIVERGE SV8100
Dial Block can also be set by using the supervisor access code. If Dial Block is set by
an extension user, the supervisor cannot release it. If Dial Block is set using the
supervisor code, the extension user cannot release it.
Important: This function works by password and Class of Service control (the
supervisor is not an assigned extension). If Dial Block is available for all Classes of
Service, everyone may become a supervisor if they know the Dial Block password.
Conference
Conference lets an extension user add additional inside and outside callers to their
conversation. With Conference, a user may set up a multiple-party telephone meeting
without leaving the office. The CD-CP00-US provides 64 Conference ports, allowing
any number of internal or external parties to be conferenced together up to a limit of
32 parties. This means that one extension can conference up to 31 internal and/or
external parties together (the originator would be the 32nd party reaching the
maximum of 32). While this Conference call is active, another user can initiate a
separate Conference also for a limit of 32 parties, or any number of conferences can
be initiated with a number of parties (up to 32) until all 64 Conference ports are busy.
Conference, Voice Call/Privacy Release
Voice Call Conference lets an extension user in the same work area join in a trunk
Conference. To initiate a Voice Call Conference, an extension user presses the
Meet-Me Conference key and tells their co-workers to join the call. The system
releases the privacy on the trunk, and other users can press the trunk line key to join
the call. Line keys assigned for the trunk blink to indicate that privacy is released, and
others can join the current call.
Voice Call Conference does not use the telephone system features to announce the
call. The person initiating the Voice Call Conference announces it verbally. A tone,
indicating others have joined the conference, can be provided.
The CD-CPOO-US provides 64 conference circuits to allow internal or external
parties to be conferenced together up to a limit of 32.
Privacy Mode Toggle Option
The Privacy Mode Toggle option allows an extension user to quickly change an
outside call from non-private to private mode. If the outside call is on a line key, the
user presses the line key to switch from non-private mode to private mode. For
systems using the Privacy Mode Toggle option, trunks initially have the privacy
released. The remainder of the call is private. If the call is on a Call Appearance
(CAP) Key, the user presses their Meet-Me Conference function key instead. Unlike
pressing the line key, pressing the Meet-Me Conference key toggles back and forth
between private and non-private mode for the call.
General Description Manual
Issue 5.0
2 - 21
Advertisement
Table of Contents
