Confirmation Tone - NEC Dterm PSIII User Manual

C T
ONFIRMATION ONE
Enables you to hear a tone that lets you know that you
made an error or for confirming that you entered
information properly.
To Turn On Confirmation Tone:
♦ Press the FNC key →3→1→4. PSIII displays:
CONF. Tone
[1]On
[2]Off
♦ Select [1] On, then press the FNC key or 1 to turn
on Confirmation Tone for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Turn Off Confirmation Tone:
♦ Press the FNC key →3→1→4. PSIII displays:
CONF. Tone
[1]On
[2]Off
♦ Select [2] Off, then press the FNC key or 1 to turn
off Confirmation Tone for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
21