DAELIM S2-250 Service Manual page 91

LH. CRANKCASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
8-4
RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE
WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS
WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS
WEIGHT ROLLERS WEIGHT ROLLERS
WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS WEIGHT ROLLERS
DISASSEMBLY
● Remove the ramp plate.
● Remove the weight rollers.
·Check the pump shaft to rotate smoothly.
● Check the weight roller for wear or damage.
● Measure the weight roller O.D.
SERVICE LIMIT : 22mm replace if below
● Measure the movable drive face bushing I.D.
SERVICE LIMIT : 27.13mm replace if over