DAELIM S2-250 Service Manual page 155

FRONT WHEEL/FRONT FORK/STEERING/BRAKE
OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL
STOPPER RING STOPPER RING STOPPER RING STOPPER RING STOPPER RING
STOPPER RING STOPPER RING STOPPER RING STOPPER RING STOPPER RING STOPPER RING
STOPPER RING STOPPER RING
STOPPER RING STOPPER RING STOPPER RING STOPPER RING STOPPER RING
FORK TUBE
TOP
14-16
OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL
BOTTOM CASE
BOTTOM
● Remove the oil seal stop ring.
● Remove the oil seal.
·Take precautions not to damage the interior and
exterior rim of the bottom case.
● Remove the fork tube from the bottom case.
● Remove the piston and rebound spring from the fork
tube.
FRONT FORK INSPECTION
● Place the fork spring on a level place, and measure the
free length.
● If the free length deviates from the service limit,
replace the spring with a new one.
● Check components for damage or abnormal wear.
Replace defective parts with new ones.
SERVICE LIMIT : FORK SPRING 235mm
● Set the fork pipe on a V-blocks, and measure fork pipe
deflection by rotating with a dial gauge.
SERVICE LIMIT : Replace if the deflection is greater
than 0.2mm