Front Fork - DAELIM S2-250 Service Manual

FRONT WHEEL/FRONT FORK/STEERING/BRAKE
14-14
● Apply the silicone grease to the boot.
● Connect the boot to the portion of the caliper.
● Install the pad spring in the caliper.
● Install the caliper pin bolt and the slide pin in the
caliper.
● Install the brake pad and the hanger pin in the caliper.
● Install the front caliper to the front fork
● Tighten the bolt to the specified torque.
TORQUE VALUE : 3.0kgf·m
● Connect the brake hose to the caliper and install 2
sealing washers and oil bolt.
● Tighten the oil bolt to the specified torque
TORQUE VALUE : 3.4kgf·m
● Fill the brake fluid to the upper limit line and bleed air.

FRONT FORK

REMOVAL
● Remove the following parts.
-Front under cover
-Front brake caliper
-Front fender
-Front wheel
● When removing the front fork, loosen the fork pipe
bolt lightly.
·Support the vehicle securely under the engine not to
turn over it.
·Loosen the fork pipe bolt, but do not remove it.
● Loosen the 4 setting bolts securing the RH./LH. front
fork, remove the RH./LH. front fork.
● After removal of RH. front fork, loosen the flange bolt
and remove the front brake hose clamp A.