9. A.C GENERATOR / STARTER CLUTCH
INFORMATION· · · · · · · · · · 9-1
SERVICE
R. CRANKCASE COVER REMOVAL· · 9-2
STARTER CLUTCH· · · · · · · · · · · · · · · · 9-3
SERVICE INFORMATION
● Drain the coolant before removing the right crankcase cover.
● Be careful not to drain the coolant when the engine temperature in high. (Perform this operation when the engine is
cold.)
● Drain the engine oil into a clean container before removing the right crankcase cover.
● When the right crankcase cover is installed, fill with the recommended engine oil and coolant.
●
Then, bleed air from the water jacket.
SPECIFICATIONS
Large end side clearance
Connecting rod large end right angle direction clearance
TORQUE VALUES
FLYWHEEL NUT : 5.39~6.37kgf·m
ITEM
FLYWHEEL INSTALLATION· · · · · · 9-4
STATOR INSTALLATION· · · · · · · · · · 9-5
R. CANKCASE COVER INSTALLATION· · 9-5
STANDARD
22.026~22.045mm
42.195~42.208mm
SERVICE LIMIT
22.15mm
9
41.5mm
9-1