DAELIM S2-250 Service Manual page 130

PLAY
PLAY
AXIAL RADIAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
CRANKSHAFT/CRANKCASE
● Measure the crankshaft bearing play.
SERVICE LIMITS :
AXIAL : 0.20mm replace if over
RADIAL : 0.05mm replace if over
CRANKCASE INSTALLATION
● Clean off all gasket material from the crankcase mating
surfaces.
·Avoid damaging the crankcase mating surfaces.
● Install a new oil seal into the LH. crankcase.
● Place the LH. crankcase down and install the
crankshaft into the LH. crankcase.
·Avoid damaging the oil seal.
·Apply grease to the lip of the oil seal.
12-5