DAELIM S2-250 Service Manual page 16

STANDARD TORQUE VALUES
ITEM
5mm BOLT, NUT
6mm BOLT, NUT
8mm BOLT, NUT
10mm BOLT, NUT
12mm BOLT, NUT
SYMBOLS / ABBREVIATIONS
The following symbols are used in this manual to represent job-related warnings or cautions.
SYMBOL
Indicates dangerous area. Serious
accident may result if instructions are not
followed.
The following symbols indicate oil adding, oil change, or parts.
SYMBOL
OIL
Add oil. If there is no specific oil indicated, use the designated or recommended engine oil.
GREASE Apply grease
Indicates reference page. (example : Refer to page 3-1)
(⇨3-1)
The following abbreviations are used in this manual.
ASS'Y
LH.
RH.
TORQUE VALUE
0.5 kgf·m
1.0 kgf·m
2.2 kgf·m
3.5 kgf·m
5.5 kgf·m
MEANING
ASSEMBLY
Left
Right
SERVICE INFORMATION
ITEM
5mm SCREW
6mm SCREW
6mm FLANGE BOLT, NUT
8mm FLANGE BOLT, NUT
10mm FLANGE BOLT, NUT
SYMBOL
Indicates important work. Minor injury or
vehicle part damage may result if instruction
are not followed.
Indicates general safety matters. Provides
safety and appropriate handling procedures.
MEANING
TORQUE VALUE
0.4 kgf·m
0.9 kgf·m
1.2 kgf·m
2.7 kgf·m
4.0 kgf·m
MEANING
1-13