DAELIM S2-250 Service Manual page 129

CRANKSHAFT/CRANKCASE
12-4
LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE
LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE
LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE
LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE
LH. CRANKCASE LH. CRANKCASE LH. CRANKCASE
OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL
● Remove the oil seal from the LH. crankcase.
● Install a new drive shaft oil seal.
CRANKCASE INSPECTION
● Measure the connecting rod big end sied clearance.
SERVICE LIMITS : 0.6mm replace if over
● Measure the connecting rod small end I.D.
SERVICE LIMITS : 17.06mm replace if over
● Measure the crankshaft runout.
SERVICE LIMITS : 0.10mm replace if over