Poor Front/Rear Suspension Performance; Fuel Gauge Reading Inaccurate (Ignition Switch On) - DAELIM ROADWIN VJ125 Service Manual

POOR FRONT/REAR SUSPENSION PERFORMANCE

INSPECTION
1. Suspension excessively soft.
2. Suspension excessively hard.
3. Noise from the suspension.
FUEL GAUGE
GAUGE READING INACCURATE (IGNITION SWTICH ON)
INSPECTION
1. Operate the turn signal to check the
battery circuit.
Signal operates satisfactorily.
2. Remove the fuel level sensor, and
move float to check the status of
operation.
Float up : Full position
Float down : Empty position
Needle not moving.
3. Short-circuit the tank unit terminal
on the wire harness side.
Needle not moving.
4. Terminal joints loose or faulty
connection.
Check
Signal continuously
operates dim or does not
operate at all.
Needle moves.
Needle not moving.
Unsatisfactory
TROUBLESHOOTING
CAUSE OF TROUBLE
Cushion spring weak.
Overloaded.
Damper oil leaks.
Fork pipe or cushion rod bent.
Sliders stuck.
Cushion stopper rubber damaged.
CAUSE OF TROUBLE
Fuse cut.
Battery weak or totally discharged.
Faulty ignition swtich.
Faulty terminal connection.
Wire harness damaged.
Faulty float.
Balance coil damaged or shorted.
Terminal loose.
Faulty terminal connection.
Balance coil/lead shorted or
damaged.
21-5