Starter Idle Gear Inspection; Reduction Gear Inspection; Starter Clutch Inspection; Starter Clutch Disassembly - DAELIM ROADWIN VJ125 Service Manual

STARTER IDLE GEAR
GEAR SHAFT
GEAR SHAFT
REDUCTION GEAR
SOCKET BOLTS
SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS
SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS
SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS SOCKET BOLTS
SOCKET BOLTS
A.C GENERATOR / STARTER CLUTCH

STARTER IDLE GEAR INSPECTION

Inspect the wear and damage of starter ldle gear.
Measure the gear inside diameter.
SERVICE LIMIT : 10.100mm
Measure the gear shaft outside diameter.
SERVICE LIMIT : 9.970mm

REDUCTION GEAR INSPECTION

Inspect the wear and damage of reduction gear.
Measure the gear inside diameter.
SERVICE LIMIT : 10.100mm
Measure the gear shaft outside diameter.
SERVICE LIMIT : 9.970mm
STARTER CLUTCH
INSPECTION
Check the operation of the one-way clutch by
turning the driven gear.
You should be able to turn the driven gear
counterclockwise smoothly, but the gear should not
turn clockwise.
DISASSEMBLY
Remove the three socket bolts, and remove the one
way clutch from the flywheel.
8-5