DAELIM ROADWIN VJ125 Service Manual page 152

BOTTOM CASE BOTTOM CASE BOTTOM CASE
BOTTOM CASE BOTTOM CASE BOTTOM CASE BOTTOM CASE
BOTTOM CASE BOTTOM CASE BOTTOM CASE BOTTOM CASE
BOTTOM CASE BOTTOM CASE BOTTOM CASE BOTTOM CASE BOTTOM CASE
FORK PIPE FORK PIPE FORK PIPE
FORK PIPE FORK PIPE FORK PIPE FORK PIPE
FORK PIPE FORK PIPE FORK PIPE FORK PIPE
FORK PIPE FORK PIPE FORK PIPE FORK PIPE FORK PIPE
OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE
OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE
OIL LOCK PIECE OIL LOCK PIECE
OIL LOCK PIECE OIL LOCK PIECE OIL LOCK PIECE
DIAL GAUGE
SLIDER BUSHING
BACK-UP RING
FRONT WHEEL/FRONT FORK/STEERING
SEAT PIPE SEAT PIPE SEAT PIPE SEAT PIPE SEAT PIPE
SEAT PIPE SEAT PIPE SEAT PIPE SEAT PIPE SEAT PIPE SEAT PIPE
SEAT PIPE SEAT PIPE SEAT PIPE SEAT PIPE
SEAT PIPE
FORK PIPE
CHECK POINTS
Check components for damage or abnormal wear.
Replace defective parts with new ones.
Place the fork pipe in V-block and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT : 0.2mm
Visually inspect the slider and fork pipe bushings.
Replace the bushings if there is excessive scoring or
scratching, or if the teflon is worn so that the copper
surface appears on more than 3/4 of the entire surface.
Check the back-up ring ; replace it if there is any
distortion at the points shown.
13-15