Figure 3-2 Removing A Drive Module - HP C7745NB - SureStore DLT Tape Autoloader 1/9 Manual

5. Lay the connector assembly to the side, allowing the external cables
6. Loosen the top and bottom thumbscrews on the drive module (Figure
7. Using the handle that is mounted on the back of the drive module,
As the drive module is pulled out, support the bottom of the drive module
CAUTION
to avoid dropping or damaging it.
Figure 3-2 Removing a Drive Module
Chapter 3
to hang from the connector. Do not disconnect external cables from
the connector plate.
3-2).
pull the drive module straight out with one hand while supporting
the bottom of the drive module with the other hand.
Replacing Autoloader Parts
Removing and Installing Drive Modules
R e
p l
a c
i n
g
P a
r t s
3-5