Returning The Autoloader - HP C7745NB - SureStore DLT Tape Autoloader 1/9 Manual

Hp surestore tape autoloader model 1/9 upgrade and parts replacement guide

Hide thumbs Also See for C7745NB - SureStore DLT Tape Autoloader 1/9:

Table of Contents

Replacing Autoloader Parts

Returning the Autoloader

1. Verify that the drive is empty.

2. If the drive contains a tape, unload it. Refer to the backup software

documentation, or access the following menu path from the front

panel..

Operations ->

Drive and Tape Operations ->

Unload Tape from Drive ->

3. To remove all tapes from the autoloader:

a. Pull the unlocked door down to access the magazine and tapes.

b. Remove the magazine by fully depressing the release button on

the bottom of the magazine while pulling the magazine out with

the tab (see Figure 3-4).

c. Use the magazine carrying handle to lift it out from the

autoloader.

d. To remove a tape, grasp the top and bottom corners of a tape, and

pull the tape straight out of the magazine. Do not hold the

magazine handle down when you are removing tapes. When the

handle is depressed, the tapes are locked in place.

4. Re-install the magazine back into the autoloader.

3-8

Chapter 3

Table of Contents