Using The Optional Remote Management Card - HP C7745NB - SureStore DLT Tape Autoloader 1/9 Manual

NOTE
NOTE
NOTE
Upgrading Firmware
Upgrading Firmware
You can also check your current firmware revisions from the remote
management card:
1. Enter the designated IP address into the web browser to launch the
Web-Based Library Administrator pages.
2. Select the
[Report]
3. Scroll down to the
autoloader and drive firmware revisions.
Ensure that your backup software does not "SCSI reserve" the autoloader,
as this can prevent a firmware download.

Using the Optional Remote Management Card

(Autoloader Firmware Only)
All autoloader component firmware, except drive firmware, can be easily
downloaded from the remote management card.
The firmware files are available at www.hp.com/go/support, or contact
your support provier. These files must be loaded on the local host
computer before downloading firmware. First select your product, and
then select
Downloads & Drivers
1. Once the autoloader is configured for network access, enter the IP
address within your web browser to launch the web-based library
administrator pages. (See "Configuring the Remote Management
Card" on page 2-6.)
2. Select the
[Configuration]
3. Select
[Firmware Download]
4. Enter the full path name for the download file, or use the
button to locate the file.
The autoloader administrator password is required for this process. If the
password is not set, you will not be permitted to download firmware.
4-4
tab.
section of the page to view your
Firmware Revisions
.
tab from the main screen.
.
[Browse]
Chapter 4