Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 177

Table 8-22 Element Options (continued)
Parameter Description
Value Specify the application identification number. Click Add.
Collector Element Type
Name Specify the element name.
Property Using the drop-down list box, select the element property. Options
include: CollectorID and CollectorInterface.
Value Specify the user-defined Flow Collector Identification or Collector
Interface name. Click Add.
Date Element Type
Name Specify the element name.
Test Using the drop-down list box, select when to test the value. Options
include: After and Before.
Value Click the Calendar icon and select a date. Click Add. The value default
is the current date.
Time Element Type
Name Specify the element name.
Test Using the drop-down list box, select when to test the value. Options
include: After and Before.
Value Using the drop-down list box, select the hour and minutes. Click Add.
Day Element Type
Name Specify the element name.
Type Using the drop-down list box, select the amount of time. Options
include: Week and Month.
Value Specify the day of the week or enter the month. Click Add.
Flow Length Element Type
Name Specify the element name.
Test Using the drop-down list box, select how to test the numeric Flow
Length value based on a single flow stat record. Options include:
Above, Below, and Equals.
Value Specify the numeric value for the precise flow length. Click Add.
ICMP Element Type
Name Specify the element name.
Property Using the drop-down list box, select the ICMP Type property. Options
include: Type and Code.
Value Specify the numeric value for the ICMP Type or Code. Click Add.
Note: For a list of STRM default ICMP Types or Codes, see the STRM
Default Application Configuration Guide; or, for a reference on the
current RFC Standards, go to:
http://www.erg.abdn.ac.uk/users/gorry/course/inet-pages/icmp-code.ht
ml
STRM Administration Guide
Managing Custom Views 169