Flow Shape Group - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual

336 ISP T D
EMPLATE EFAULTS

Flow Shape Group

Table B-7 Custom Views - QoS View (continued)
QoS Group
IP Routing Control
Expedited
Class 4
Class 3
Class 2
Class 1
Best Effort
Default FlowShape groups include:
Table B-8 Custom Views - Flow Shape View
Flow Shape Group
Inbound_Only
Outbound_Only
Mostly_Inbound
Mostly_Outbound
NearSame_Internet
Local_Unidirectional
Local_SRC_Bias
Local_DST_Bias
NearSame_Internal
STRM Administration Guide
Group Objects
Specifies QoS values used by IP routing protocols.
Specifies values related to expedited forwarding, such as, a
virtual leased line or premium service.
Specifies values related to Class 4 traffic.
Specifies values related to Class 3 traffic.
Specifies values related to Class 2 traffic.
Specifies values related to Class 1 traffic.
Specifies traffic related to best effort QoS traffic. Best effort
services does not guarantee delivery.
Group Objects
Specifies traffic flows originating from a host on the Internet
and is not responded to by a local host.
Specifies traffic flows originating from a local host attempting
to communicate with a host on the Internet in which the
remote host does not respond.
Specifies traffic flows that sends 5 times more data into the
network than received.
Specifies traffic flows that sends 5 times more bytes out of the
network than received.
Specifies traffic to and from hosts on the Internet that have
around the same amount of bytes sent and received.
Specifies a one-sided flow with a source and destination
within the local network.
Specifies internal traffic that has 5 times more bytes
transferred by the source than the destination.
Specifies internal traffic that has 5 times more bytes
transferred by the destination than the source.
Specifies internal traffic that has a balance of source and
destination bytes.