Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 48

40 S U STRM
ETTING P
Table 3-5 STRM Console Management Parameters (continued)
Parameter
ARP - Safe Interfaces
Enable 3D graphs in the
user interface
Authentication Settings
Persistent Session
Timeout
Maximum Login Failures
Login Failure Attempt
Window (in minutes)
Login Failure Block Time
(in minutes)
Login Host Whitelist
Inactivity Timeout (in
minutes)
Login Message File
DNS Settings
Enable DNS Lookups for
Asset Profiles
Enable DNS Lookups for
Host Identity
WINS Settings
WINS Server
STRM Administration Guide
Description
Specify the interface you wish to be excluded from ARP
resolution activities. The default is eth0.
Using the drop-down list box, select one of the following:
Yes - Displays Dashboard graphics in 3-dimensional
•
format.
No - Displays Dashboard graphics in 2-dimensional
•
format.
Specify the length of time, in days, that a user system will
be persisted, in days. The default is 0, which disables this
features and the "remember me" option upon login.
Specify the number of times a login attempt may fail. The
default is 5.
Specify the length of time during which a maximum login
failures may occur before the system is locked. The
default is 10 minutes.
Specify the length of time that the system is locked if the
the maximum login failures value is exceeded. The
default is 30 minutes.
Specify a list of hosts who are exempt from being locked
out of the system. Enter multiple entries using a comma
delimited list.
Specify the amount of time that a user will be
automatically logged out of the system if no activity
occurs.
Specify the location and name of a file that includes
content you wish to appear on the STRM log in window.
This file may be in text or HTML format and the contents
of the file appear below the current log in window.
Enable or disable the ability for STRM to search for DNS
information in asset profiles. When enabled, this
information is available using the right-mouse button
(right-click) on the IP address or host name located in the
Host Name (DNS Name) field in the asset profile. The
default is False.
Enable or disable the ability for STRM to search for host
identity information. When enabled, this information is
available using the right-mouse button (right-click) on any
IP address or asset name in the interface. The default is
True.
Specify the location of the Windows Internet Naming
Server (WINS) server.