Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 55

Step 6
Step 7
Step 8
Changing Passwords
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
For each interface listed, select the role you wish to assign to the interface using
the Role list box.
Click Save Configuration.
Wait for the interface to refresh before continuing.
To change the passwords:
In the Administration Console, click the System Configuration tab.
The System Configuration panel appears.
Click the System Management icon.
The System Management window appears.
For the host you wish to change passwords, click Manage System.
Log-in to the System Administration interface. The default is:
Username: root
Password: <your root password>
Note: The username and password are case sensitive.
From the menu, select Managed Host Config > Root Password.
The Root Passwords window appears.
Update the passwords and confirm:
Note: Make sure you record the entered values.
New Root Password - Specify the root password necessary to access the
•
web-based system administration interface.
• Confirm New Root Password - Re-enter the password for confirmation.
Click Update Password.
STRM Administration Guide
Configuring Access Settings 47