Flow Shape Group - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual

Flow Shape Group

Table B-7 Custom Views - QoS View
QoS Group
NetworkControl
Object
IPRoutingControl
Expedited
Class 4
Class 3
Class 2
Class 1
Best Effort
Default FlowShape groups include:
Table B-8 Custom Views - Flow Shape View
Flow Shape Group
Inbound_Only
Outbound_Only
Mostly_Inbound
Mostly_Outbound
NearSame_Internet
Local_Unidirectional
Local_SRC_Bias
Local_DST_Bias
NearSame_Internal
STRM Administration Guide
Group Objects
Specifies QoS values related to link layer and routing
protocols.
Specifies QoS values used by IP routing protocols.
Specifies values related to expedited forwarding, such as, a
virtual leased line or premium service.
Specifies values related to Class 4 traffic.
Specifies values related to Class 3 traffic.
Specifies values related to Class 2 traffic.
Specifies values related to Class 1 traffic.
Specifies traffic related to best effort QoS traffic. Best effort
services does not guarantee delivery.
Group Objects
Specifies traffic flows originating from a host on the Internet
and is not responded to by a local host.
Specifies traffic flows originating from a local host attempting
to communicate with a host on the Internet in which the
remote host does not respond.
Specifies traffic flows that sends 5 times more data into the
network than received.
Specifies traffic flows that sends 5 times more bytes out of the
network than received.
Specifies traffic to and from hosts on the Internet that have
around the same amount of bytes sent and received.
Specifies a one-sided flow with a source and destination
within the local network.
Specifies internal traffic that has 5 times more bytes
transferred by the source than the destination.
Specifies internal traffic that has 5 times more bytes
transferred by the destination than the source.
Specifies internal traffic that has a balance of source and
destination bytes.
Default Custom Views 253