Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 57

In the Time Zone box, select the time zone in which this managed host is located
Step 6
using the Change timezone to list box. Click Save.
In the Time Server box, you must specify the following options:
Step 7
Timeserver hostnames or addresses - Specify the time server hostname or
•
IP address.
• Set hardware time too - Select the check box if you wish to set the hardware
time as well.
Synchronize on schedule? - Specify one of the following options:
•
- No - Select the option if you do not wish to synchronize the time specified in
the Run at selected time below options. Go to
- Yes - Select the option if you wish to synchronize the time. See options
below.
Simple Schedule - Specify if you wish the time update to occur at a specific
•
time. If not, select the Run at times selected below option.
• Times and dates are selected below - Specify the time you wish the time
update to occur.
Click Sync and Apply.
Step 8
STRM Administration Guide
Configuring Access Settings
Step 8.
49