Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 56

48 S U STRM
ETTING P
Updating System
Time
Step 1
Step 2
Step 3
Step 4
Step 5
You are able to change the time for the following options:
• System time
Hardware time
•
Time Zone
•
• Time Server
Note: You must change the system time information on the host operating the
Console only. The change is then distributed to all managed hosts in your
deployment.
You can configure time for your system using one of the following methods:
Configuring Your Time Server Using RDATE
•
Configuring Time Settings For Your System
•
Configuring Your Time Server Using RDATE
To update the time settings using RDATE:
In the Administration Console, click the System Configuration tab.
The System Configuration panel appears.
Click the System Management icon.
The System Management window appears.
For the host on which you wish to configure time, click Manage System.
Log-in to the System Administration interface. The default is:
Username: root
Password: <your root password>
Note: The username and password are case sensitive.
From the menu, select Managed Host Config > System Time.
The System Time window appears.
Caution: The time settings window is divided into four sections. You must save
each setting before continuing. For example, when you configure System Time,
you must click Apply within the System Time section before continuing.
STRM Administration Guide