Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 160

152 M V
ANAGING IEWS
Step 4
Step 5
Step 6
Step 7
Step 8
Enter values for the following parameters:
Table 8-10 Remote Networks - Add New Object Parameters
Parameter Description
Group Select the group for this object. Using the drop-down list box,
select a group or click Add Group to add a new group.
Name Specify the name for the object.
Weight Specify the object weight or use the arrows to change the
existing numeric value. The range is 1 to 100.
IP/CIDR(s) Specify the IP address or CIDR range for the object. Click Add.
Description Specify a description for the object.
Color Specify a color for this object. Enter the RGB alpha-numeric
value or click Select Color to access the color palette.
Database Length Using the drop-down list box, select the database length.
Click Save.
Click Return.
Close the Remote Networks View window.
From the Administration Console menu, select Configuration > Deploy
Configuration Changes.
All changes are deployed.
STRM Administration Guide