Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 129

Step 3
Step 4
Step 5
Step 6
Enabling/Disabling a
Flow Source
Step 1
Step 2
Step 3
Step 4
Step 5
Click Edit.
The Edit Flow Source window appears.
Edit values, as necessary. For more information on values for flow source types,
see Adding a Flow Source.
Click Save.
From the Administration Console menu, select Configurations > Deploy
configuration changes.
To enable or disable a flow source:
In the Administration Console, click the Flow Configuration tab.
The Flow Configuration panel appears.
Click the Manage Flow Source icon.
The Flow Source window appears.
Select the flow source you wish to enable or disable.
Click Enable/Disable.
The Enabled column indicates if the flow source is enabled or disabled. If the flow
source was previously disabled, the column now indicates True to indicate the flow
source is now enabled. If the flow source was previously enabled, the column now
indicates False to indicate the flow source is now disabled.
From the Administration Console menu, select Configurations > Deploy
configuration changes.
STRM Administration Guide
Managing Flow Sources 121