Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 59

In the Time Zone box, select the time zone in which this managed host is located
Step 6
using the Change timezone to list box. Click Save.
In the System Time box, you must specify the current date and time you wish to
Step 7
assign to the managed host. Click Apply.
If you wish to set the System Time to the same as the Hardware time, click Set
system time to hardware time.
In the Hardware Time box, you must specify the current date and time you wish to
Step 8
assign to the managed host. Click Save.
If you wish to set the System Time to the same as the Hardware time, click Set
hardware time to system time.
STRM Administration Guide
Configuring Access Settings 51