Click Next.
Step 2
The Enter the host's IP window appears.
Enter values for the parameters:
Step 3
Enter the IP of the server or appliance to add - Specify the IP address of the
•
host you wish to add to your System View.
Enter the root password of the host - Specify the root password for the host.
•
Confirm the root password of the host - Specify the password again, for
•
confirmation.
Host is NATed - Select the check box if you wish to use an existing Network
•
Address Translation (NAT) on this managed host. For more information on NAT,
see
Using NAT with
STRM.
STRM Administration Guide
Managing Your System View
83