Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 53

Step 8
Step 9
Updating Your Host
Set-up
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Click Apply Access Controls.
Wait for the interface to refresh before continuing.
You can use the web-based system administration interface to configure the mail
server you wish STRM to use, the global password for STRM configuration, and
the IP address for the STRM Console:
To configure your host set-up:
In the Administration Console, click the System Configuration tab.
The System Configuration panel appears.
Click the System Management icon.
The System Management window appears.
For the host you wish to update your host set-up, click Manage System.
Log-in to the System Administration interface. The default is:
Username: root
Password: <your root password>
Note: The username and password are case sensitive.
From the menu, select Managed Host Config > STRM Setup.
The STRM Setup window appears.
You must enable communications between the STRM Console and the current
host. In the Enter the IP address of the STRM console field, enter the IP address
of the managed host operating the STRM Console.
In the Mail Server field, specify the address for the mail server you wish STRM to
use. STRM uses this mail server to distribute alerts and event messages. To use
the mail server provided with STRM, enter localhost.
STRM Administration Guide
Configuring Access Settings 45