Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 77

The component appears in your Flow View.
Repeat for each component you wish to add to your view.
Step 6
From the menu, select File > Save to staging.
Step 7
Connecting Once you add all the necessary components in your Flow View, you must connect
Components them together. The Flow View only allows you to connect appropriate components
together. For example, you can connect a Flow Processor to a Flow Collector and
not an Update Daemon.
To connect components:
In the Flow View, select the component for which you wish to establish a
Step 1
connection.
From the menu, select Actions > Add Connection.
Step 2
Note: You can also use the right mouse button (right-click) to access the Actions
menu item.
An arrow appears in your map.
Drag the end of the arrow to the component on which you wish to establish a
Step 3
connection. You can only connect appropriate components, for example, you can
connect a Classification Engine to an Update Daemon.
components you are able to connect.
Table 5-3 Component Connections
You can connect a...
Flow Collector
Flow Processor
Classification Engine
The arrow connects the two components.
Repeat for all remaining components in your deployment that you wish to establish
Step 4
a connection.
From the menu, select File > Save to Staging.
Step 5
To
Flow Processor
Flow Processor
Classification Engine
Off-site Target
Off-site Source
Update Daemon
Flow Writer - Multiple Classification Engines may be
connected to a single Flow Writer.
STRM Administration Guide
Building Your Flow View
Table 5-3 provides a list of
69