Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual page 27

From the Authentication Module drop-down list box, select the authentication type
Step 3
you wish to configure.
Configure the selected authentication type:
Step 4
If you selected System Authentication, go to
a
If you selected RADIUS Authentication, enter values for the following
b
parameters:
Table 2-3 RADIUS Parameters
Parameter
RADIUS Server
RADIUS Port
Authentication
Type
Shared Secret
If you selected TACACS Authentication, enter values for the following
c
parameters:
Table 2-4 TACACS Parameters
Parameter
TACACS Server
TACACS Port
Description
Specify the hostname or IP address of the RADIUS server.
Specify the port of the RADIUS server.
Specify the type of authentication you wish to perform. The
options are:
CHAP (Challenge Handshake Authentication Protocol) -
•
Establishes a Point-to-Point Protocol (PPP) connection
between the user and the server.
MSCHAP (Microsoft Challenge Handshake Authentication
•
Protocol) - Authenticates remote Windows workstations.
ARAP (Apple Remote Access Protocol) - Establishes
•
authentication for AppleTalk network traffic.
ASCII
•
PAP (Password Authentication Protocol) - Sends clear text
•
between the user and the server.
Specify the shared secret that STRM uses to encrypt RADIUS
passwords for transmission to the RADIUS server.
Description
Specify the hostname or IP address of the TACACS server.
Specify the port of the TACACS server.
STRM Administration Guide
Authenticating Users
Step 5
19