Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
• The maximum number of sheets you can load at the same time depends on paper type. Do not
load paper over the limit mark. For the maximum number of sheets you can load, see p.135
"Recommended Paper Sizes and Types".
1.
Open the bypass tray.
2.
Push up the release lever.
1. Release lever
3.
Insert the paper face down.
4.
Align the paper guides to the paper size.
If the guides are not flush against the paper, images might be skewed or paper misfeeds might
occur.
CMS022
1
CMS023
Loading Paper into the Bypass Tray
127