Ricoh Aficio MP 301SPF User Manual page 182

10. Troubleshooting
Message
"Insufficient Memory"
"Memory Retrieval Error"
"No response from the
server. Authentication has
failed."
"Output tray has been
changed."
"Print overrun."
"Printing privileges have not
been set for this document."
"Receiving data failed."
180
Causes
A memory allocation error
occurred.
A memory allocation error
occurred.
A timeout occurred while
connecting to the server for
LDAP Authentication or
Windows Authentication.
The output tray was
changed because the paper
size of the specified output
tray is limited.
Images were discarded
while printing.
The PDF document you have
tried to print has no
privileges to print.
Data reception was aborted. Resend the data.
Solutions
PCL 5e
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in "Menu:", and then select
[Raster] in the "Vector/Raster:"
list. In some cases, it will take a
long time to complete a print job.
Turn off the main power switch, and
then back on again. If the message
appears again, replace the RAM. For
details about replacing the RAM,
contact your service representative.
Check the status of the server.
Specify the proper output tray.
PCL 5e
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Contact the owner of the document.