9. Adding Paper and Toner
• When copying onto OHP transparencies, see "Copying onto OHP Transparencies", Copy/
Document Server
• When printing on OHP transparencies from the computer, see p.130 "Setting thick paper or
OHP transparencies using the control panel".
• Fan OHP transparencies thoroughly whenever you use them. This prevents OHP
transparencies from sticking together, and from feeding incorrectly.
• Remove copied or printed sheets one by one.
• When loading translucent paper:
• Remove copied or printed sheets one by one.
• When loading translucent paper, always use long grain paper, and set the paper direction
according to the grain.
• Translucent paper easily absorbs humidity and becomes curled. Remove curl in the translucent
paper before loading.
Thick Paper
This section gives you various details about and recommendations concerning thick paper.
When loading thick paper of 106–157 g/m
recommendations below to prevent misfeeds and loss of image quality.
• Store all your paper in the same environment - a room where the temperature is 20–25 °C (68–
77 °F) and the humidity is 30–65%.
• When loading thick paper, set the paper direction according to its grain, as shown in the following
diagram:
Direction of paper
grain
• Select [Thick Paper] for [Paper Type] of the bypass tray.
138
.
2
(28–40 lb. Bond) in the bypass tray, follow the
Bypass tray