When You Have Problems Operating the
Machine
This section describes common problems and messages. If other messages appear, follow the
instructions displayed.
Problem
The [Facsimile] or [Scanner]
icon does not appear on the
[Home] screen even though
the copier screen appears
when the machine is turned
on using the main power
switch.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
The lamp remains lit and the
machine does not enter
Sleep mode even though the
[Energy Saver] key was
pressed.
The display is off.
Nothing happens when the
[Check Status] key or the
[Energy Saver] key is
pressed.
"Please wait." appears.
Causes
Functions other than the
copier function are not yet
ready.
Functions other than the
copier function are not yet
ready.
• The ADF is open.
• The machine is
communicating with
external equipment.
• The hard disk is active.
The machine is in Sleep
mode.
The main power switch is
turned off.
This message appears when
you press the [Energy Saver]
key.
When You Have Problems Operating the Machine
Solutions
Functions appear on the [Home]
screen when they become ready for
use. Time required varies by function.
Wait a little longer.
Functions appear in the User Tools
menu when they become ready for
use. Time required varies by function.
Wait a little longer.
• Close the ADF.
• Check if the machine is
communicating with external
equipment.
• Wait a little longer.
Press the [Energy Saver] key or the
[Check Status] key to cancel Sleep
mode.
Turn on the main power switch.
Wait for a while. If the machine does
not get ready in five minutes, contact
your service representative.
149