2. Getting Started
This chapter describes how to start using this machine.
Guide to Names and Functions of Components
Guide to Components
• Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If
the machine overheats, a fault might occur.
Front and left view
10
1. Exposure glass cover or ADF
(The illustration shows the ADF.)
Lower the exposure glass cover or the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
2. Extenders
Raise these extenders to support large paper.
3. Control panel
See p.35 "Guide to the Names and Functions of the Machine's Control Panel".
4. Internal tray
Copied/printed paper and fax messages are delivered here.
(mainly Europe)
1
9
8
2
3
4
5
6
7
CMR001
25